Bluetooth low energy (LE) Module BT03-1 is a TI Bluetooth low energy controller CC2640R2F. This module is ideal for low power wireless sensing device applications including mobile phone accessories, sports, consumer electronics, HID and etc. The module is integrated with PCB antenna and crystal to reduce the external BOM cost. We also provide EVK-CC640 Development Kit for engineer to develop their own application based on our BT03-1 Bluetooth module.
Absolute Maximum Ratings | |
Supply Voltage | - 0.3 ~ 3.9 V |
Voltage on any digital pin | - 0.3 ~ VDDS + 0.3 V, Max 4.1 |
Voltage on X32K_Q1, X32K_Q2 | - 0.3 ~ 2.25V |
Input RF level | 5dBm |
Storage temperature range | -40 ~ 125 oC |
Recommended Operating Conditions | |
Operating supply voltage | 1.8 ~ 3.8 V |
Operating ambient temperature range, TA | -25 ~ 75 oC |
DC Characteristics TA=25oC, VDDS = 3V | |
VIH | 0.8 V (Max.) |
VIL | 0.2 V (Min.) |
GPIO VOH at 8mA load | 2.68 V (Typ.) |
GPIO VOL at 8mA load | 0.33 V (Typ.) |
GPIO VOH at 4mA load | 2.75 V (Typ.) |
GPIO VOL at 4mA load | 0.28V (Type.) |
Typical Current Consumption TA=25oC, VCC = 3V | |
RX mode, standard mode, no peripherals active, low MCU activity | 6.1 mA (Typ.) |
TX mode, 0dBm output power, no peripherals active, low MCU activity | 6.1 mA (Typ.) |
TX mode, 5dBm output power, no peripherals active, low MCU activity | 9.1 mA (Typ.) |
Active, Core running coreMark | 1.45 mA + 32uA/Mhz (Typ.) |
Idle, supply system and RAM powered | 550 uA (Typ.) |
Standby, with Cache, RTC, CPU, RAM and (partial) register retention, XOSC_LF | 3 uA (Typ.) |
Standby, with RTC, CPU, RAM and (partial) register retention, XOSC_LF | 6.7 mA |
Standby, with RTC, CPU, RAM and (partial) register retention, RCOSC_LF | 1.1uA (Typ.) |
RF Character TA=25oC, VCC = 3V | |
Frequency Range | 2402 ~ 2480 MHz |
Channel Spacing | 2 MHz |
Output Power | -23 ~ 5 dBm |
Receiver Sensitivity | -94 dBm (Typ.) |
Frequency error tolerance | -350 ~ 350 KHz |
© 2023 Digimore Electronics Co., Ltd. All rights reserved.